chris/esphome
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

adding basement and living and updating the whole ordeal

Browse source
This commit is contained in:
Chris Cochrun 2026-03-10 09:42:33 -05:00
parent 61223688f6
commit e967121746
4 changed files with 479 additions and 173 deletions
Download patch file Download diff file Expand all files Collapse all files

130
basement.yml Normal file
View file

@ -0,0 +1,130 @@
esphome:
name: basement-sensor
esp8266:
board: nodemcuv2
# Enable logging
logger:
# Enable Home Assistant API
api:
# password: ""
ota:
- platform: esphome
password: ""
wifi:
ssid: "Cochrun"
password: "GreasyChicken784"
manual_ip:
static_ip: 192.168.1.122
gateway: 192.168.1.1
subnet: 255.255.255.0
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Basement Fallback Hotspot"
password: "RUfAhbEfZmOU"
captive_portal:
web_server:
port: 80
version: 3
http_request:
verify_ssl: false
bluetooth_proxy:
i2c:
sda: GPIO4
scl: GPIO5
scan: true
id: bus_a
sensor:
- platform: aht10
variant: AHT20
temperature:
filters:
offset: 1.3
name: "Basement Room Temperature"
humidity:
name: "Basement Room Humidity"
update_interval: 30s
i2c_id: bus_a
# uart:
# tx_pin: GPIO1
# rx_pin: GPIO3
# baud_rate: 115200
# sensor:
# - platform: bme280_i2c
# temperature:
# name: "Temperature"
# id: temperature
# filters:
# offset: -4.3
# oversampling: 16x
# pressure:
# name: "Pressure"
# id: pressure
# humidity:
# name: "Humidity"
# id: humidity
# i2c_id: bus_a
# address: 0x76
# dfrobot_sen0395:
# binary_sensor:
# # Information coming from uart bus
# - platform: dfrobot_sen0395
# name: Mmwave UART
# # on_...:
# # - dfrobot_sen0395.settings:
# # factory_reset: true
# # detection_segments:
# # # Define between one and four segments
# # - [0cm, 3m]
# # - [5.1m, 6.6m]
# # output_latency:
# # delay_after_detect: 0s
# # delay_after_disappear: 0s
# # sensitivity: 7
# # Information coming from dedicated gpio (IO2)
# - platform: gpio
# name: Mmwave GPIO
# device_class: motion
# pin:
# number: GPIO16
# mode: INPUT_PULLDOWN
# switch:
# # Switch to turn on/off detection
# - platform: dfrobot_sen0395
# type: sensor_active
# name: Mmwave Active
# - platform: dfrobot_sen0395
# type: presence_via_uart
# name: Mmwave UART active
# restore_mode: always_on
# - platform: dfrobot_sen0395
# type: turn_on_led
# name: Mmwave Led
# restore_mode: always_off
# icon: "mdi:led-on"
# - platform: dfrobot_sen0395
# type: start_after_boot
# name: Mmwave Start
# restore_mode: always_on

117
kitchen.yml
View file

@ -1,117 +0,0 @@
esphome:
name: kitchen-sensor
esp8266:
board: esp01
# Enable logging
logger:
# Enable Home Assistant API
api:
password: ""
ota:
- platform: esphome
password: ""
wifi:
ssid: "Cochrun"
password: "GreasyChicken784"
manual_ip:
static_ip: 192.168.1.125
gateway: 192.168.1.1
subnet: 255.255.255.0
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Kitchen Fallback Hotspot"
password: "RUfAhbEfZmOU"
captive_portal:
# web_server:
# port: 80
# version: 3
# http_request:
# verify_ssl: false
i2c:
sda: GPIO4
scl: GPIO5
scan: true
id: bus_a
uart:
tx_pin: GPIO1
rx_pin: GPIO3
baud_rate: 115200
sensor:
- platform: bme280_i2c
temperature:
name: "Temperature"
id: temperature
filters:
offset: -1.3
oversampling: 16x
pressure:
name: "Pressure"
id: pressure
humidity:
name: "Humidity"
id: humidity
i2c_id: bus_a
address: 0x76
dfrobot_sen0395:
binary_sensor:
# Information coming from uart bus
- platform: dfrobot_sen0395
name: Mmwave UART
# on_...:
# - dfrobot_sen0395.settings:
# factory_reset: true
# detection_segments:
# # Define between one and four segments
# - [0cm, 3m]
# - [5.1m, 6.6m]
# output_latency:
# delay_after_detect: 0s
# delay_after_disappear: 0s
# sensitivity: 7
# Information coming from dedicated gpio (IO2)
- platform: gpio
name: Mmwave GPIO
device_class: motion
pin:
number: GPIO16
mode: INPUT_PULLDOWN
switch:
# Switch to turn on/off detection
- platform: dfrobot_sen0395
type: sensor_active
name: Mmwave Active
- platform: dfrobot_sen0395
type: presence_via_uart
name: Mmwave UART active
restore_mode: always_on
- platform: dfrobot_sen0395
type: turn_on_led
name: Mmwave Led
restore_mode: always_off
icon: "mdi:led-on"
- platform: dfrobot_sen0395
type: start_after_boot
name: Mmwave Start
restore_mode: always_on

108
living.yml Normal file
View file

@ -0,0 +1,108 @@
esphome:
name: living-room-sensor
esp32:
board: nodemcu-32s
framework:
type: arduino
# Enable logging
logger:
# Enable Home Assistant API
api:
# password: ""
ota:
- platform: esphome
password: ""
wifi:
ssid: "Cochrun"
password: "GreasyChicken784"
manual_ip:
static_ip: 192.168.1.121
gateway: 192.168.1.1
subnet: 255.255.255.0
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Living Room Fallback Hotspot"
password: "RUfAhbEfZmOU"
captive_portal:
web_server:
port: 80
version: 3
http_request:
verify_ssl: false
bluetooth_proxy:
####################
# TEMP
####################
i2c:
sda: GPIO32
scl: GPIO33
scan: true
id: bus_a
# sensor:
# - platform: bme280_i2c
# temperature:
# name: "Temperature"
# id: temperature
# filters:
# offset: -3.3
# pressure:
# name: "Pressure"
# id: pressure
# humidity:
# name: "Humidity"
# id: humidity
# i2c_id: bus_a
# address: 0x76
sensor:
- platform: aht10
variant: AHT20
temperature:
filters:
offset: 0.7
name: "Living Room Temperature"
humidity:
name: "Living Room Humidity"
update_interval: 30s
i2c_id: bus_a
####################
# PRESENCE
####################
# uart:
# tx_pin: GPIO27
# rx_pin: GPIO26
# baud_rate: 115200
# dfrobot_sen0395:
# binary_sensor:
# # Information coming from uart bus
# - platform: dfrobot_sen0395
# name: Mmwave UART
# # Information coming from dedicated gpio (IO2)
# - platform: gpio
# name: Mmwave GPIO
# device_class: motion
# pin:
# number: GPIO25
# mode: INPUT_PULLDOWN
# switch:
# # Switch to turn on/off detection
# - platform: dfrobot_sen0395
# type: sensor_active
# name: Mmwave Active

297
thermostat.yml
View file

@ -50,7 +50,8 @@ ch422g:
# Enable Home Assistant API
api:
reboot_timeout: 30min
password: ""
batch_delay: 300ms
# password: ""
ota:
- platform: esphome
@ -60,7 +61,7 @@ wifi:
ssid: "Cochrun"
password: "GreasyChicken784"
power_save_mode: none
reboot_timeout: 10s
reboot_timeout: 20s
manual_ip:
static_ip: 192.168.1.123
gateway: 192.168.1.1
@ -81,6 +82,8 @@ web_server:
http_request:
bluetooth_proxy:
i2c:
- id: bus_a
sda: GPIO08
@ -88,6 +91,12 @@ i2c:
scan: True
frequency: 400kHz
button:
- platform: restart
name: "Restart Device"
- platform: safe_mode
name: "Restart in Safe Mode"
time:
- platform: homeassistant
id: hass_time
@ -99,6 +108,18 @@ time:
text: !lambda |-
auto time = id(hass_time).now();
return time.strftime("%a %b %e, %I:%M %p");
- minutes: /2 # Update every second
then:
- lambda: |-
auto therm = id(climape);
if (therm->mode == CLIMATE_MODE_HEAT && therm->action != CLIMATE_ACTION_HEATING) {
therm->refresh();
};
if (therm->mode == CLIMATE_MODE_COOL && therm->action != CLIMATE_ACTION_COOLING) {
therm->refresh();
};
- script.execute:
id: refresh_hvac_state
- hours: 1,2,3,4
minutes: 5
seconds: 0
@ -110,24 +131,50 @@ time:
then:
- switch.turn_off: switch_antiburn
# - script.execute: update_date_time_label
script:
- id: refresh_hvac_state
then:
# - http_request.get:
# url: http://192.168.1.124/switch/heat
# capture_response: true
# request_headers:
# Content-Type: application/json
# on_response:
# then:
# - lambda: |-
# json::parse_json(body, [](JsonObject root) -> bool {
# if (root["value"]) {
# ESP_LOGD("main", "Heat is: %d", root["value"]);
# return root["value"];
# } else {
# ESP_LOGD("main", "Heat problem");
# return false;
# }
# });
sensor:
- platform: bme280_i2c
update_interval: 20s
# iir_filter: 16x
temperature:
name: "Temperature"
id: temperature
filters:
- offset: 1.0
on_value:
then:
- lvgl.label.update:
id: temp_label
text: !lambda |-
auto temp = x * (9.0/5.0) + 32.0;
return str_truncate(to_string(temp), 4);
- lvgl.indicator.update:
id: current_temp_needle
value: !lambda |-
return x * 10.0;
- offset: !lambda return id(temp_offset).state;
# on_value:
# then:
# - lvgl.label.update:
# id: temp_label
# text: !lambda |-
# auto temp = x * (9.0/5.0) + 32.0;
# return str_truncate(to_string(temp), 4);
# - lvgl.indicator.update:
# id: current_temp_needle
# value: !lambda |-
# return x * 10.0;
humidity:
name: "Humidity"
id: humidity
@ -146,6 +193,9 @@ sensor:
id: pressure
address: 0x76
- platform: internal_temperature
name: "Chip Temperature"
- platform: template
name: "Altitude"
lambda: |-
@ -170,6 +220,50 @@ sensor:
unit_of_measurement: °C
icon: 'mdi:thermometer-alert'
- platform: homeassistant
id: living_room_temp
entity_id: sensor.living_room_sensor_living_room_temperature
# filters:
# - lambda: return (x - 32.0) * (5.0/9.0);
- platform: homeassistant
id: bedroom_temp
entity_id: sensor.bedroom_temperature_offset
# filters:
# - lambda: return (x - 32.0) * (5.0/9.0);
- platform: homeassistant
id: basement_temp
entity_id: sensor.basement_sensor_basement_room_temperature
# filters:
# - lambda: return (x - 32.0) * (5.0/9.0);
- platform: homeassistant
id: house_temp
entity_id: sensor.house_temperature
filters:
- lambda: return (x - 32.0) * (5.0/9.0);
- platform: template
id: used_temp
lambda: |-
if (id(house_temp).has_state()) {
return id(house_temp).state;
} else {
return id(temperature).state;
};
on_value:
then:
- lvgl.label.update:
id: temp_label
text: !lambda |-
auto temp = x * (9.0/5.0) + 32.1;
return str_truncate(to_string(temp), 4);
- lvgl.indicator.update:
id: current_temp_needle
value: !lambda |-
return x * 10.0;
mapping:
- id: weather_mapping
from: string
@ -179,6 +273,10 @@ mapping:
light-rain: "󰖗"
medium-rain: "󰖗"
heavy-rain: "󰖗"
"Mostly Cloudy": "󰖐"
"Breezy": ""
"Sunny": "󰖙"
text_sensor:
- platform: homeassistant
id: weather
@ -245,6 +343,65 @@ switch:
- platform: homeassistant
id: fan
entity_id: switch.hvac_fan
# These are for controling the hvac from the thermostat directly w/o
# needing to have home assistant running or the server running
- platform: template
name: hvac_heat_state
id: switch_heat_state
internal: true
optimistic: true
on_turn_on:
- http_request.post:
url: http://192.168.1.124/switch/heat/turn_on
on_turn_off:
- http_request.post:
url: http://192.168.1.124/switch/heat/turn_off
- platform: template
name: hvac_ac_state
id: switch_ac_state
internal: true
optimistic: true
on_turn_on:
- http_request.post:
url: http://192.168.1.124/switch/ac/turn_on
on_turn_off:
- http_request.post:
url: http://192.168.1.124/switch/ac/turn_off
- platform: template
name: hvac_fan_state
id: switch_fan_state
internal: true
optimistic: true
on_turn_on:
- http_request.post:
url: http://192.168.1.124/switch/fan/turn_on
on_turn_off:
- http_request.post:
url: http://192.168.1.124/switch/fan/turn_off
## This will turn all of the hvac off with one switch
- platform: template
name: HVAC Master Control
id: switch_master
optimistic: true
on_turn_on:
- climate.control:
id: climape
preset: Home
mode: HEAT_COOL
on_turn_off:
- http_request.post:
url: http://192.168.1.124/switch/heat/turn_off
- http_request.post:
url: http://192.168.1.124/switch/ac/turn_off
- http_request.post:
url: http://192.168.1.124/switch/fan/turn_off
- climate.control:
id: climape
preset: Away
mode: "OFF"
- platform: template
name: Antiburn
id: switch_antiburn
@ -283,19 +440,20 @@ climate:
- platform: thermostat
id: climape
name: "Thermostat"
sensor: temperature
sensor: used_temp
humidity_sensor: humidity
min_cooling_off_time: 120s
min_cooling_run_time: 120s
min_heating_off_time: 120s
min_heating_run_time: 120s
min_fanning_off_time: 120s
min_fanning_run_time: 120s
min_idle_time: 300s
cool_deadband: 0.2 °F
cool_overrun: 0.5 °F
heat_deadband: 0.2 °F
heat_overrun: 0.5 °F
startup_delay: true
min_cooling_off_time: 60s
min_cooling_run_time: 60s
min_heating_off_time: 60s
min_heating_run_time: 60s
min_fanning_off_time: 60s
min_fanning_run_time: 60s
min_idle_time: 60s
cool_deadband: 0.1 °F
cool_overrun: 0.9 °F
heat_deadband: 0.1 °F
heat_overrun: 0.9 °F
visual:
temperature_step:
target_temperature: 0.5 °F
@ -332,18 +490,23 @@ climate:
default_preset: Home
preset:
- name: Home
default_target_temperature_low: 67 °F
default_target_temperature_high: 79 °F
mode: heat_cool
default_target_temperature_low: 68 °F
default_target_temperature_high: 77 °F
- name: Summer
mode: cool
default_target_temperature_low: 60 °F
default_target_temperature_high: 77 °F
- name: Winter
mode: heat
default_target_temperature_low: 68 °F
default_target_temperature_high: 85 °F
- name: Night Winter
mode: heat
default_target_temperature_low: 64 °F
default_target_temperature_high: 85 °F
- name: Away
mode: heat_cool
default_target_temperature_low: 60 °F
default_target_temperature_high: 85 °F
on_state:
@ -354,10 +517,19 @@ climate:
return x.target_temperature_high * 10.0;
end_value: !lambda |-
return x.target_temperature_low * 10.0;
- lvgl.arc.update:
id: hvac_temp_knob
value: !lambda |-
return x.target_temperature_high * 10.0;
- if:
condition:
lambda: "return id(climape).mode == CLIMATE_MODE_HEAT;"
then:
- lvgl.arc.update:
id: hvac_temp_knob
value: !lambda |-
return x.target_temperature_low * 10.0;
else:
- lvgl.arc.update:
id: hvac_temp_knob
value: !lambda |-
return x.target_temperature_high * 10.0;
- if:
condition:
lambda: "return x.mode != CLIMATE_MODE_OFF;"
@ -588,7 +760,7 @@ font:
type: gfonts
family: Quicksand
weight: 400
id: body
id: body_font
size: 18
- file:
type: gfonts
@ -711,6 +883,18 @@ number:
max_value: 180
step: 5
mode: box
- platform: template
name: Temperature Offset
optimistic: true
icon: "mdi:thermometer-chevron-down"
id: temp_offset
unit_of_measurement: "°F"
initial_value: -3.1
restore_value: true
min_value: -7.0
max_value: 7.0
step: 0.1
mode: box
lvgl:
# buffer_size: 25%
@ -939,7 +1123,7 @@ lvgl:
bg_opa: TRANSP
border_width: 0
scales:
range_from: 160 # 16°C
range_from: 80 # 16°C
range_to: 340 # 34°C
# Set temperature ticks background
ticks:
@ -948,21 +1132,21 @@ lvgl:
width: 2
color: ${color_white}
indicators:
# Set temperature ticks
- tick_style:
id: hvac_temp_ticks
start_value: 80
end_value: 340 # 24°C Should be the same as the set temperature label
color_start: ${color_green}
color_end: ${color_green}
width: 2
# Curremt temperature needle
- line:
id: current_temp_needle
color: ${color_red}
width: 3
r_mod: 10
width: 8
r_mod: 35
value: 340 # 34°C Should be the same as the current temperature label
# Set temperature ticks
- tick_style:
id: hvac_temp_ticks
start_value: 160
end_value: 240 # 24°C Should be the same as the set temperature label
color_start: ${color_green}
color_end: ${color_green}
width: 2
# Meter inner Ring only for visual effect
- obj:
id: meter_ring_inner
@ -982,7 +1166,7 @@ lvgl:
arc_opa: TRANSP
adjustable: true
value: 240 # 24°C (24x10) Should be the same as the set temperature needle
min_value: 160
min_value: 80
max_value: 340
width: 335
height: 335
@ -1156,13 +1340,14 @@ lvgl:
text_font: h3
text: ""
text_color: ${color_white}
pad_top: 50
pad_top: 20
align: LEFT_MID
long_mode: WRAP
- label:
id: out_weather_sum_label
text_font: h4
text: ""
width: 150
text_color: ${color_white}
align: LEFT_MID
long_mode: WRAP
@ -1187,26 +1372,26 @@ lvgl:
- label:
id: set_temp_label
id: action_label
text_font: h2
text: "Loading..."
align: center
y: -90
text_color: 0xA5A5A9
- label:
id: action_label
text_font: h4
text: "Loading..."
align: center
# x: 145
y: 70
y: -90
text_color: 0xA5A5A9
- label:
id: temp_label
text_font: h1
text: "Loading..."
text: "00"
align: center
y: -10
text_color: 0xE2E4E5
- label:
id: set_temp_label
text_font: h2
text: "00"
align: center
y: 70
text_color: 0xA5A5A9