more devices

mmwave.yml

@@ -0,0 +1,65 @@
+esphome:
+  name: living-motion
+
+esp32:
+  board: upesy_wroom
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  password: ""
+
+ota:
+  password: ""
+
+wifi:
+  ssid: "Cochrun"
+  password: "GreasyChicken784"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Living Motion Fallback Hotspot"
+    password: "VxKj9HWaXThv"
+
+captive_portal:
+    
+uart:
+  tx_pin: GPIO27
+  rx_pin: GPIO26
+  baud_rate: 115200
+
+dfrobot_sen0395:
+
+binary_sensor:
+  # Information coming from uart bus
+  - platform: dfrobot_sen0395
+    name: Mmwave UART
+
+  # Information coming from dedicated gpio (IO2)
+  - platform: gpio
+    name: Mmwave GPIO
+    device_class: motion
+    pin:
+      number: GPIO25
+      mode: INPUT_PULLDOWN
+
+switch:
+  # Switch to turn on/off detection
+  - platform: dfrobot_sen0395
+    type: sensor_active
+    name: Mmwave Active
+
+  # - platform: dfrobot_sen0395
+  #   type: turn_on_led
+  #   name: Mmwave Led
+  #   restore_mode: always_on
+  #   icon: "mdi:led-on"
+
+  # - platform: dfrobot_sen0395
+  #   type: start_after_boot
+  #   name: Mmwave Start
+  #   restore_mode: always_on