chris/esphome
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

idk

Browse source
This commit is contained in:
Chris Cochrun 2025-07-02 08:10:40 -05:00
parent f2b8e8a280
commit a53fda923c
3 changed files with 278 additions and 64 deletions
Download patch file Download diff file Expand all files Collapse all files

22
display.yml
View file

@ -2,7 +2,7 @@ esphome:
name: display name: display
esp32: esp32:
board: esp32dev board: nodemcu-32s
framework: framework:
type: arduino type: arduino
@ -28,18 +28,26 @@ wifi:
captive_portal: captive_portal:
psram: # psram:
mode: octal # mode: octal
speed: 80MHz # speed: 80MHz
spi:
clk_pin: GPIO33
mosi_pin: GPIO18
miso_pin: GPIO19
# Example minimal configuration entry # Example minimal configuration entry
display: display:
- platform: ili9xxx - platform: ili9xxx
model: ili9486 model: ili9488
dc_pin: GPIOXX dc_pin: GPIO14
reset_pin: GPIOXX reset_pin: GPIO16
cs_pin: GPIO17
invert_colors: false invert_colors: false
show_test_card: true show_test_card: true
color_palette: 8BIT
data_rate: 80MHz
dimensions: dimensions:
height: 320 height: 320
width: 480 width: 480

3
kitchen.yml
View file

@ -42,6 +42,9 @@ sensor:
temperature: temperature:
name: "Temperature" name: "Temperature"
id: temperature id: temperature
filters:
offset: -1.3
oversampling: 16x
pressure: pressure:
name: "Pressure" name: "Pressure"
id: pressure id: pressure

317
thermostat.yml
View file

@ -2,9 +2,19 @@ esphome:
name: thermostat name: thermostat
esp32: esp32:
board: esp32dev board: esp32-s3-devkitc-1
variant: esp32s3
framework: framework:
type: arduino type: esp-idf
sdkconfig_options:
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: y
CONFIG_ESP32S3_DATA_CACHE_64KB: y
CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
CONFIG_SPIRAM_RODATA: y
psram:
mode: octal
speed: 80MHz
# Enable logging # Enable logging
logger: logger:
@ -29,15 +39,15 @@ wifi:
captive_portal: captive_portal:
i2c: i2c:
sda: GPIO21 sda: GPIO08
scl: GPIO22 scl: GPIO09
scan: true scan: True
id: bus_a id: bus_a
uart: # uart:
tx_pin: GPIO27 # tx_pin: GPIO27
rx_pin: GPIO26 # rx_pin: GPIO26
baud_rate: 115200 # baud_rate: 115200
sensor: sensor:
- platform: bme280_i2c - platform: bme280_i2c
@ -53,61 +63,68 @@ sensor:
i2c_id: bus_a i2c_id: bus_a
address: 0x76 address: 0x76
dfrobot_sen0395: # dfrobot_sen0395:
binary_sensor: # binary_sensor:
# Information coming from uart bus # # Information coming from uart bus
- platform: dfrobot_sen0395 # - platform: dfrobot_sen0395
name: Mmwave UART # id: mmwave_uart
# name: Mmwave UART
# on_...: # # on_...:
# - dfrobot_sen0395.settings: # # - dfrobot_sen0395.settings:
# factory_reset: true # # factory_reset: true
# detection_segments: # # detection_segments:
# # Define between one and four segments # # # Define between one and four segments
# - [0cm, 3m] # # - [0cm, 3m]
# - [5.1m, 6.6m] # # - [5.1m, 6.6m]
# output_latency: # # output_latency:
# delay_after_detect: 0s # # delay_after_detect: 0s
# delay_after_disappear: 0s # # delay_after_disappear: 0s
# sensitivity: 7 # # sensitivity: 7
# Information coming from dedicated gpio (IO2) # # Information coming from dedicated gpio (IO2)
- platform: gpio # - platform: gpio
name: Mmwave GPIO # name: Mmwave GPIO
device_class: motion # device_class: motion
pin: # pin:
number: GPIO25 # number: GPIO25
mode: INPUT_PULLDOWN # mode: INPUT_PULLDOWN
switch: switch:
# Switch to turn on/off detection # # Switch to turn on/off detection
- platform: dfrobot_sen0395 # - platform: dfrobot_sen0395
type: sensor_active # type: sensor_active
name: Mmwave Active # name: Mmwave Active
- platform: dfrobot_sen0395 # - platform: dfrobot_sen0395
type: presence_via_uart # type: presence_via_uart
name: Mmwave UART active # name: Mmwave UART active
restore_mode: always_on # restore_mode: always_on
- platform: dfrobot_sen0395 # - platform: dfrobot_sen0395
type: turn_on_led # type: turn_on_led
name: Mmwave Led # name: Mmwave Led
restore_mode: always_on # restore_mode: always_on
icon: "mdi:led-on" # icon: "mdi:led-on"
- platform: dfrobot_sen0395 # - platform: dfrobot_sen0395
type: start_after_boot # type: start_after_boot
name: Mmwave Start # name: Mmwave Start
restore_mode: always_on # restore_mode: always_on
# on_turn_on:
# then:
# - number.set:
# id: sensitivity
# value: !lambda |-
# return id(mmwave_uart).state + 1;
- platform: gpio - platform: gpio
pin: 16 pin: 16
id: heater id: heater
restore_mode: RESTORE_DEFAULT_OFF restore_mode: RESTORE_DEFAULT_OFF
- platform: gpio - platform: gpio
pin: 17 pin: 44
id: ac id: ac
restore_mode: RESTORE_DEFAULT_OFF restore_mode: RESTORE_DEFAULT_OFF
- platform: gpio - platform: gpio
@ -115,6 +132,46 @@ switch:
id: fan id: fan
restore_mode: RESTORE_DEFAULT_OFF restore_mode: RESTORE_DEFAULT_OFF
# button:
# - platform: template
# id: inner_button
# on_press:
# - dfrobot_sen0395.settings:
# sensitivity: !lambda |-
# return id(sensitivity).state - 1;
# - platform: template
# id: inner_distance
# on_press:
# - dfrobot_sen0395.settings:
# detection_segments:
# - [0cm, 3.3m]
# number:
# - platform: template
# id: sensitivity
# name: Mmwave sensitivity
# optimistic: true
# min_value: 1
# max_value: 10
# step: 1
# mode: slider
# set_action:
# - button.press:
# id: inner_button
# - platform: template
# id: distance
# name: Mmwave distance
# optimistic: true
# min_value: 0.0
# max_value: 9.0
# step: 0.1
# mode: slider
# set_action:
# - button.press:
# id: inner_distance
climate: climate:
- platform: thermostat - platform: thermostat
name: "Thermostat" name: "Thermostat"
@ -143,10 +200,156 @@ climate:
default_target_temperature_low: 67 °F default_target_temperature_low: 67 °F
default_target_temperature_high: 76 °F default_target_temperature_high: 76 °F
# display: # Example minimal configuration entry
# - platform: ili9xxx display:
# model: ili9486 - platform: rpi_dpi_rgb
# dc_pin: GPIOXX id: my_display
# reset_pin: GPIOXX auto_clear_enabled: false
# invert_colors: false update_interval: never
# show_test_card: true color_order: RGB
pclk_frequency: 14MHz
dimensions:
width: 800
height: 480
de_pin:
number: 5
hsync_pin:
number: 46
ignore_strapping_warning: true
vsync_pin:
number: 3
ignore_strapping_warning: true
pclk_pin: 7
pclk_inverted: false
hsync_back_porch: 10 #30
hsync_front_porch: 20 #210
hsync_pulse_width: 10 #30
vsync_back_porch: 10 #4
vsync_front_porch: 10 #4
vsync_pulse_width: 10 #4
data_pins:
red:
- 1 #r3
- 2 #r4
- 42 #r5
- 41 #r6
- 40 #r7
blue:
- 14 #b3
- 38 #b4
- 18 #b5
- 17 #b6
- 10 #b7
green:
- 39 #g2
- 0 #g3
- 45 #g4
- 48 #g5
- 47 #g6
- 21 #g7
font:
- file: "gfonts://Roboto"
id: chu_nano
size: 12
touchscreen:
platform: gt911
id: my_touch
interrupt_pin: GPIO4
on_touch:
- lambda: |-
ESP_LOGI("cal", "x=%d, y=%d, x_raw=%d, y_raw=%0d",
touch.x,
touch.y,
touch.x_raw,
touch.y_raw
);
lvgl:
buffer_size: 25%
pages:
- id: clock_page
widgets:
- obj: # Clock container
height: size_content
width: 800 #240
align: CENTER
pad_all: 0
border_width: 0
bg_color: 0xFFFFFF
widgets:
- meter: # Clock face
height: 400 #220
width: 400 #220
align: center
bg_opa: TRANSP
text_color: 0x000000
scales:
- ticks: # minutes scale
width: 1
count: 61
length: 10
color: 0x000000
range_from: 0
range_to: 60
angle_range: 360
rotation: 270
indicators:
- line:
id: minute_hand
width: 3
color: 0xa6a6a6
r_mod: -4
value: 0
- ticks: # hours scale
width: 1
count: 12
length: 1
major:
stride: 1
width: 4
length: 8
color: 0xC0C0C0
label_gap: 12
angle_range: 330
rotation: 300
range_from: 1
range_to: 12
- indicators:
- line:
id: hour_hand
width: 5
color: 0xa6a6a6
r_mod: -30
value: 0
angle_range: 360
rotation: 270
range_from: 0
range_to: 720
time:
- platform: homeassistant
id: time_comp
interval:
- interval: 30s
then:
if:
condition:
time.has_time:
then:
- script.execute: time_update
script:
- id: time_update
then:
- lvgl.indicator.update:
id: minute_hand
value: !lambda |-
return id(time_comp).now().minute;
- lvgl.indicator.update:
id: hour_hand
value: !lambda |-
auto now = id(time_comp).now();
return std::fmod(now.hour, 12) * 60 + now.minute;